Products for Pre-fabricated Flashings

  • Sarnacorners Universal

    Sarnacorners Universal is a 60 mil (1.5 mm) thick prefabricated corner used as a time-saving and attractive part of curb, pitch pocket and wall flashing details. Sarnacorners - Universal can be cut into one inside or one outside corner.

     
  • Open Post Flashing

    The Open Post Flashing is a 48 mil (0.048 in./1.2 mm) thick prefabricated flashing created from Sarnafil membrane. The Open Post Flashing is a time saving and convenient method to flash obstructed rooftop conduits and pipes.

     
  • Sarnastacks

    Sarnastacks are 48 mil (0.048 in./1.2 mm) thick prefabricated membrane
    flashings. Sarnastacks are a time-saving and convenient method to flash rooftop vent stacks and pipes. Sarnastacks simplify the flashing procedures for various penetrations, reducing the risk of leakage at small to typical pipe size penatration details.

     

    Data Sheets

    Sarnastacks
  • Sarnacircles

    Sarnacircles is a 60 mil (1.5 mm) thick prefabricated circle used as a time-saving and attractive patch on a Sika Sarnafil roofing or waterproofing installation.

     

    Data Sheets

    Sarnacircles
  • Sarnaflash

    Sarnaflash is a prefabricated expansion joint cover used with Sika Sarnafi l roofing and waterproofi ng membranes. Sarnafl ash can accomodate 2- dimensional movement of expansion gaps from 1 to 4-½ inches (25 to 114 mm) across.  Sarnaflash is made with Sarnafi l’s S327 polyester-reinforced membrane, neoprene foam, and galvanized metal. The S327 membrane contains ultraviolet stabilizers, fl ame retardant, biocide and a unique lacquer coating to resist staining from airborne dirt and pollutants.

     

    Data Sheets

    Sarnaflash