Products for Edge Metal Flashing

  • Edge Grip Fascia

    Edge Grip Fascia is a low profile retainer bar and fascia assembly used with either an adhered or mechanically attached Sika Sarnafil Roof System, which clamps the roof membrane against the building to help prevent leaks and blow-offs.

     
  • Edge Grip Extruded Fascia

    Edge Grip Extruded Fascia is a low profile extruded retainer bar and fascia assembly used with either an adhered or mechanically attached Sika Sarnafil Roof System, which clamps the roof membrane against the building to help prevent leaks and blow-offs.

     
  • Sarnaclad

    Sarnaclad is a heat-weldable flashing product used with Sarnafil G and S membranes to form a monolithic roofing or waterproofing system. Sarnaclad is a 24 gauge, G90 galvanized metal sheet with a 20 mil (0.5 mm) unsupported Sarnafil membrane laminated on one side.

     

    Data Sheets

    Sarnaclad
  • Sarnafil® G410 Flashing Membrane

    Sarnafil G410 flashing membrane is a heat-weldable thermoplastic roofing membrane formulated for direct exposure to the weather and is produced with an integral fiberglass mat reinforcement for dimensional stability. Sarnafil G410 flashing membrane is used to flash roof penetrations. It is also used as an exposed flashing membrane within Sarnafil waterproofing systems. G410 flashing membrane is produced in various widths and lengths.

     
  • Sarnafil® G459 Flashing Membrane

    Sarnafil G459 flashing membrane is a heat-weldable roofing membrane formulated for direct exposure to the weather and is produced with an integral fiberglass mat reinforcement for dimensional stability. G459 flashing membrane is used to flash roof penetrations.  G459 flashing membrane can be adhered directly to asphalt-contaminated surfaces. G459 flashing membrane is produced in various widths and lengths.

     
  • Sarnareglet

    Sarnareglet is a heavy-duty counterflashing used as a key component within certain flashing details for Sika Sarnafil roofing and waterproofing systems. Sarnareglet has a 2-¼ in (57 mm) deep profile and is provided in 10 ft (3.05 m) lengths. Sarnareglet is produced from 6063T5 extruded aluminum and is provided with predrilled holes at 8 in (20 cm) o.c. for attachment to walls or curbs.

     

    Data Sheets

    Sarnareglet